865-933-5031
Sale

Prince Double Gear Pump .976/.86 Cu In, 9 Tooth 16/32 Spline, w/ Priority Flow Divider

Be the first to review this product

SKU: 255-002-EPS

Regular Price: $619.50

Special Price $425.00

Prince

Description

Details

Prince SP-F58(SPD1B1614) Double Gear Pump with Priority Flow Divider
.976 cu. in. displacement (Front)
8.45 GPM @ 2000 RPM (Front)
.86 cu. in. displacement (Rear)
7.45 GPM @ 2000 RPM (Rear)
Max PSI: Front: 2200 Rear: 2400
3500 Max RPM
#16 SAE Inlet Ports (Common Inlet)
#10 SAE Outlet Port (Front)
#12 SAE Outlet Port (Rear) (Excess Flow)
#6 SAE Outlet Port (Rear) (Controlled Flow)
SAE 9 Tooth 16/32 Spline Shaft
2-Bolt "A" Flange
Clockwise drive shaft rotation
Relief set at 1500 PSI
Priority Flow to be 3.0 GPM at 2000 RPM with minimum pressure on both excess and controlled flow ports

Outstanding Features
Bearings PTFE composite bearings are used due to the ability to handle heavy loads, low shaft speeds, and high levels of contamination. Engineering tests on the PTFE bearings indicate they will withstand bearing loads over twice as high as conventional steel backed aluminum bearings used in many pumps. The PTFE resin layer will absorb a high degree of contamination with out damage to the pump. Also since the PTFE layer is self lubricating, contamination from bearing wear in high load situations (when no oil film is present) is reduced. The side benefit from reduced friction under all conditions is a reduced consumption of power.
Gears and drive shaft are hardened alloy steel of one piece construction.
Special gear design: Non-symmetrical gear insures low noise and compactness.
Dependable service: Balanced pressure loading insures small dispersion, good durability and maintains high performance.
Perfect alignment: “Through bore” design provides perfect alignment of pump element and assures even bearing load.
With the aluminum alloy casing, the SP Series features light weight and easy handling.

Specs

Additional Info

SKU 255-002-EPS
Mfg Part Num SP-F58(SPD1B1614)
Cu In Displacement .976/.86
Max RPM 3500
Max PSI 2400
Mount 2-Bolt A
Inlet Port Sizes #12 SAE
Outlet Port Sizes #10 SAE
Shaft No
Shaft Size 9 Tooth 16/32 Spline
Shaft Extension No
Rotation CW
GPM Hi / Lo No
GPM No
GPM @ No Load No
GPM @ 1200 RPM No
GPM @ 1800 RPM No
GPM @ 2000 RPM 8.45/7.45

Reviews

Write Your Own Review

You're reviewing: Prince Double Gear Pump .976/.86 Cu In, 9 Tooth 16/32 Spline, w/ Priority Flow Divider

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.