Prince Double Gear Pump 2.318 cu in, SAE "B" 2-Bolt mount, 13 Tooth 16/32 Spline

Prince SPD33838-2H1L Double Gear Pump
2.318 cu. in. displacement (Front & Rear)
20.07 GPM @ 2000 RPM
Max PSI: Front: 3000 Rear: 2700
3000 Max RPM
#20 SAE Inlet Ports
#16 SAE Outlet Ports
SAE 13 Tooth 16/32 Spline Shaft
2-Bolt "B" Flange
Counter Clockwise drive shaft rotation
Side inlets and outlets
Outstanding Features
Bearings PTFE composite bearings are used due to the ability to handle heavy loads, low shaft speeds, and high levels of contamination. Engineering tests on the PTFE bearings indicate they will withstand bearing loads over twice as high as conventional steel backed aluminum bearings used in many pumps. The PTFE resin layer will absorb a high degree of contamination with out damage to the pump. Also since the PTFE layer is self lubricating, contamination from bearing wear in high load situations (when no oil film is present) is reduced. The side benefit from reduced friction under all conditions is a reduced consumption of power.
Gears and drive shaft are hardened alloy steel of one piece construction.
Special gear design: Non-symmetrical gear insures low noise and compactness.
Dependable service: Balanced pressure loading insures small dispersion, good durability and maintains high performance.
Perfect alignment: “Through bore” design provides perfect alignment of pump element and assures even bearing load.
With the aluminum alloy casing, the SP Series features light weight and easy handling.